Canon EOS 5D - Focusing Screen Ee-A Instruction Manual page 39

During the image transfer, do not turn off the camera's power switch. Doing so will interrupt the
image transfer.
¡
See page 35 for "Checking the Remaining Images to be Transferred and Canceling the
Image Transfer."
¡
If you select [Clear transfer history], the status of all the images in the folder or memory
card will be set to "not transferred." Then you can resend all the images in the folder or
memory card by selecting [Images not transferred].
Menu Operation During Image Transfer
You can use the menu even during image transfers. However, the following menu
operations cannot be done during image transfers since it may interfere with the image
transfer (your camera might not have all these operations):
• Protect images • Rotate • Erase • Print Order • Format
• Firmware • Sensor cleaning
• Save camera settings • Loading camera setting
Overwriting Files with the Same Name
When the utility is configured to prevent overwriting
If there is a file with the same name in the target folder on the FTP server, the new file will
be saved with an extension consisting of an underline and a numeral, as in
GA5P0003_1.JPG.
When re-transferring images after initial transfer failed
If you transfer an image file that could not be transferred initially when the utility is
configured for overwriting, the previous file may not be overwritten in some cases. If this
happens, the new file is saved with an extension consisting of an underline, a letter, and a
numeral, as in GA5P0003_a1.JPG.
4
Transfer the images.
¡
Select [Transfer].
¡
During the image transfer, the <4> lamp
will blink.
Image Batch Transfer After Shooting
3
39