Installing And Removing The Battery - Canon EOS 5D - Focusing Screen Ee-A Instruction Manual

Installing and Removing the Battery

The WFT-E1A can be powered by Battery Pack BP-511A, BP-514, BP-511, or BP-512.
The battery pack and Battery Charger CB-5L or CG-580 do not come with the WFT-E1A.
Purchase them separately if necessary.
Installing the Battery
Checking the Battery Level
When you turn on the power switch (1), the battery power level is indicated in one of
three levels.
22
1
Open the battery compartment cover.
¡
Push down the release lever and slide the cover
to the left.
2
Insert the battery.
¡
The battery contacts must face upward. Insert it
all the way in until it locks in place.
3
Close the cover.
¡
Close the cover, then slide it to the right.
P : Battery level OK.
Q : Battery level is low.
S
: Battery must be recharged.