Craftsman 11580 - C3 19.2 Volt Hammer Operator's Manual page 13

ADJUSTABLE
TORQUE CLUTCH
This product is equipped with an adjustable torque clutch
for driving different types of screws into different mate-
rials. To use the torque settings, rotate the mode selector
to the screw ( _._ ) setting. (The hammer mode ( _ )
and drill mode (_'_'q) are for full torque operations.) The
proper setting depends on the type of material and the
application.
ADJUSTING TORQUE
See Figure 8.
There are twenty-four torque indicator settings located on
the front of the drill.
[]
Rotate the adjusting ring to the desired setting.
• 1 - 4 For driving small screws
5 - 8 For driving screws into soft material
9 - 12 For driving screws into soft and hard
materials
13 - 16 For driving screws into hard wood
17 - 24 For driving large screws
BIT STORAGE
See Figure 9.
When not in use, bits provided with the drill can be placed
in the storage area located on the base of the drill.
BIT
STORAGE AREA
SCREWDRIVER BIT
Fig. 9
TO DECREASE
TORQUE
TOINCREASE
TORQUE
TORQUE
ADJUSTING RiNG
MODE
SELECTOR
Fig. 8
13