Restoring Factory Defaults; Using The Reset Button - ZyXEL Communications N4100 User Manual

Chapter 1 Introduction

1.5 Restoring Factory Defaults

You can erase the current configuration and restore factory defaults using either
the web configurator or the RESET button at the back of the device.
The web configurator allows you to reset the system but retain subscriber account
information. See
If you forget your password or cannot access the web configurator, you will need
to use the RESET button to reload the factory-default configuration file. This
means that you will lose all of your custom configuration, including the local
subscriber database, and the administrator password will be reset to "1234".

1.5.1 Using the Reset Button

Make sure the POWER LED is on (not blinking).
1
To set the device back to the factory default settings, use a pointed object to press
2
the RESET button once or until the PWR LED begins to blink and then release it.
When the PWR LED begins to blink, the defaults have been restored and the
device restarts.
24
Chapter 29 on page 225 for more information.
N4100 User's Guide