Operation Requirements; Power On Command; Power Off Command; Wide "Auto" Direct Command - Sanyo CE42LM4N-NA - CE - 42" LCD Flat Panel Display Specifications

6.4 Operation Requirements

When the TV's status in this below, Functional Execution Commands are limited.
TV Status
Standby Mode
Power Save Status
Note) When the status is above, even if the TV receives other command, it returns [ACK] [CR].

6.5 POWER ON Command

Command "C00" [CR]
Power ON.
Detail
When already Power ON, no operation is necessary.
Acceptable
Response
Unacceptable

6.6 POWER OFF Command

Command "C01" [CR]
Power OFF (Standby).
Detail
When already standby mode, no operation is necessary.
Acceptable
Response
Unacceptable

6.7 Wide "Auto" direct Command

Command "C23" [CR]
Set wide mode to "Auto" directly.
Detail
When PC mode or AV2 RGBHV mode, no operation is necessary
Acceptable
Response
Unacceptable

6.8 Wide "Natural" direct Command

Command "C24" [CR]
Set wide mode to "Natural" directly.
Detail
When PC mode or AV2 RGBHV mode, no operation is necessary
Acceptable
Response
Unacceptable

6.9 Wide "Zoom 16:9" direct Command

Command "C25" [CR]
Set wide mode to "Zoom 16:9" directly.
Detail
When PC mode or AV2 RGBHV mode, no operation is necessary
Acceptable
Response
Unacceptable
Available Functional Execution Commands
POWER ON
POWER ON
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Ver. Page 8