Basic Operation; Basic Menu Operation - Sanyo AVM-27D6 Instruction Manual

BASIC OPERATION

FIRST PREPARATIONS
Connect either Antenna or Cable TV according to "ANTENNA CONNECTION"
instructions on page 6.
Insert batteries into the remote control unit according to "REMOTE CONTROL USE"
instructions on page 5.
Insert the AC Cord Plug into a standard 120V, 60Hz polarized AC outlet.
TURN ON/OFF THE TV
1. Press the "POWER" button on the front panel
POWER POWER
or on the remote control.
or
2. Press the same button again to turn the
(Front panel) (Remote control) television off.
CHANNEL SELECTION
Use CHANNEL ( ) buttons on the remote control (or on the front panel).
Press the button to advance for the higher channels, and the
the lower channels.
NOTE : Certain channels have been preset at the factory. It may be necessary to add or
erase some channels in your areas. See "AUTO PROGRAMMING" on page 14 for
presetting channels.
Channels can be selected directly by using the number buttons on the remote control.
For example, to select channel 5, press "0" first, then press "5".
For channel 120, press the 100 button first, then press "2", then "0".
VOLUME CONTROL
Press VOLUME + / - buttons on either the
remote control or front panel to adjust volume to your
desired listening level.
Pressing the + button will increase sound volume, and the
- button will decrease sound volume.
The volume level is displayed on the screen;
reference number (0-100) and bar scale as shown.
NOTE : The volume level can be muted instantly by pressing MUTE button on the remote
control. See "MUTE Button" on page 38.
10
All manuals and user guides at all-guides.com
button to go down for
VOLUME 25

BASIC MENU OPERATION

The icon is used as a cursor.
1. Press POWER button to turn the TV on.
2. Press MENU button and move the cursor to "SET UP" option and press VOL + button.
The "SET UP" menu is displayed.
MENU
PICTURE
SOUND
TIME
SET UP
FUNCTION
SEL. + ENTER
3. Press VOL + button to select ANTENNA option. (TV or CATV)
buttons to place cursor on the "AUTO PROGRAM " option and press VOL +
4. Press CH /
button.
SET UP
* ANTENNA : TV 2
* AUTOPROGRAM
* FINE TUNE : 00
* CH GUIDE
* CH GUARD
SEL. + ENTER
5. When you have finished "AUTO PROGRAMMING", press MENU button repeatedly until the
menu disappears.
6. Press CH / buttons to select the channel you want.
7. Press VOL + or VOL - buttons to adjust volume to your desired listening level.
11
SET UP
* ANTENNA : TV 2
* AUTOPROGRAM
* FINE TUNE : 00
* CH GUIDE
* CH GUARD
SEL. + SET
AUTOPROGRAMMING
TV 2
+ STOP