Caple ATA901 Instruction Manual page 10





I N S T A L L A T I O N


Earthed Outlet

        
        
         

435-545mm
10
10
Instruction manual ATA901
Prepare for the installation:
If you have an outlet to the outside, your cooker hood can
be connected as per the below picture by means of an
extraction duct with an interior diameter of 150mm.
Earthed Outlet Box
Earthed Plug
The cooker hood should be installed so that there is a
space of 650-760mm from the centre of the mesh grease
filters to the hob (435-545mm from the bottom of the
hood to the hob). It is the manufacturer of the hob who
650-760mm
determines the clearance required and the clearance
quoted by the hob manufacturer must be followed. In the
absence of any instructions supplied with a gas hob the
minimum distance between the hob and the centre of the
mesh grease filters must be at least 760mm.


Please keep this instruction manual for future reference
Before installation, turn the unit off and unplug it from
the outlet.