Related Manuals for Caple AS610BK
Summary of Contents for Caple AS610BK
- Page 1 Instruction manual for wall chimney hoods Model codes: AS610BK / AS910BK Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk...
- Page 4 and pulling the cover off. For ease of installation, the light assembly should be fitted using a magnetic screwdriver before the hood is installed on the wall. The plastic cover is to protect the light assembly in transit. Once the light is fitted to the hood, the plastic cover is easily removed by slackening the screws and pulling the cover off.
-
Page 5: Installing The Ductwork
Installing the Ductwork to roof cap 1. Plan where the ductwork will run between the hood and the outside. The hoods exhaust vertically but can be ducted to the rear behind the chimney duct through an outside wall or vertically up through the ceiling to the roof. - Page 6 Fixing the Decorative Chimney Carefully losen but do not separate the telescopic chim ney duct pieces. Arrange the electrical power supply within the dimen sions of the decorative chimney duct. Adjust the width of the support bracket to match the upper duct. Fix it to the ceiling using the screws (B) so that it is centered in line with your hood and at a distance from the ceiling indicated.
- Page 8 1. Separate lamp cover and left bracket by unscrewing. 2. Install right bracket to the cooker hood, then tighten the screws. 3. Connect two cables. 4. Re-Install left bracket and tighten the screws.
Need help?
Do you have a question about the AS610BK and is the answer not in the manual?
Questions and answers