Firex KF10LL User Manual

1374-7205-04(KF10_KF20_KF10R_KF20R)_EN_KM738872:_
KF10
KF10LL
KF10R
Ionisation
EN14604:2005
LICENSE NO. KM 738872
INSTALLER: Please leave this user guide with the product.
SMOKE ALARM DESCRIPTION
Model KF10, KF10LL Ionisation 230V AC smoke alarm with 9V
Model KF10R
Model KF20,KF20LL
Model KF20R
• Interconnects with up to 23 other models, KF1, KF1R, KF2, KF2R, KF3, KF3R,
KF10, KF10LL, KF10R, KF20, KF20LL, KF20R, KF30, KF30LL, KF30R, 4870,
4881, 4973, 4985, 4892, 4899, 1SFW, 1SFWR, 2SFW, 2SFWR, 3SFW, 3SFWR,
and 4MCO and 4MDCO Mains CO alarms. Unique power connector prevents
interconnection with incompatible smoke alarms or security systems.
• Tamper-resist bracket quickly snaps into place and serves as a safeguard
against tampering.
• Multi-purpose green and red LEDs indicate that the smoke alarm is receiving
AC power, working under normal operation, in alarm, or under Hush Button.
• Loud alarm horn—85 decibels at 3 metres (10 feet)—sounds to alert you of
an emergency.
• Test button checks smoke alarm operation.
• All models feature Hush Button, which, when activated, quiets unwanted alarms
for up to 9 minutes.
• Models KF10, KF10LL, KF20 and KF20LL will not attach to the mounting
bracket if a battery is not in the battery pocket. These models will also sound
a short beep about once a minute if the battery is weak or improperly con-
nected.
• Models KF10R , KF20R , KF10LL and KF20LL have lithium batteries that will
last the life of the alarm and a tamper-proof locking screw option.
• Models KF10R and KF20R include permanent rechargeable lithium
batteries.
• Operating temperature: 0°C to 40°C
• Operates up to 93% humidity (non-condensing)
• Storage and Transport Conditions: -20° C to +60° C, 5-95%RH
(non-condensing)
• Models KF10, KF10R, KF10LL are designed to detect products of
combustion using ionisation technology. This product contains 0.9
microcurie of Americium 241, a radioactive material.
NOTE: Additional markings can be found on the back of the unit.
IMPORTANT SAFETY INFORMATION
PLEASE READ AND SAVE THESE
!
• DO NOT paint or cover the smoke alarm with tape.
• This smoke alarm should be out of the reach of children.
• AC smoke alarms require constant 230V AC, 50Hz power to operate
properly. Mains-only powered smoke alarms WILL NOT work if AC power is
not connected or has failed or been interrupted for any reason. Models
KF10, KF10LL and KF20, KF20LL require a working 9-volt battery to operate
properly in the event of a power failure. Models KF10R and KF20R require a
minimum of 2 full days under mains power to reach full backup capacity. DO
NOT use any other kind of battery except as specified in this user guide. DO
User Guide
PLEASE READ AND SAVE
battery back-up and Hush Button
Ionisation 230V AC smoke alarm with recharge-
able battery backup and Hush Button
Optical 230V AC smoke alarm with 9V
battery back-up with Hush Button
Optical 230V AC smoke alarm with rechargeable
battery back-up and Hush Button
SMOKE ALARM FEATURES
INSTRUCTIONS
W A R N
1
KF20
KF20LL
KF20R
Optical
2797-CPR-535595
15
EN 14604:2005
I N G
2021.6.10 3:12