Advertisement
Quick Links
Advertisement
Related Manuals for Worx WR202E
Summary of Contents for Worx WR202E
- Page 1 Owner’s manual...
- Page 3 Users can view the electronic instructions at https://wiki.worx.com/en. ORIGINAL INSTRUCTIONS PRODUCT SAFETY GENERAL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine.
- Page 4 a) Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place. b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. c) Never pick up or carry an appliance while the motor is running. d) Operate the disabling device from the appliance.
- Page 5 d) Ensure that only replacement cutting means of the right type are used. e) Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. f) In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into contact with the eyes etc.
- Page 6 After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. k) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment.
- Page 7 Band application caution (for Wi-Fi 5G device) Legal Information This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in 5150 to 5350 MHz frequency range in following countries:...
- Page 8 Check with your local authorities or retailer for recycling advice. Class III appliance Read operator's manual Detachable supply unit Your Landroid Vision can be used with other Worx functional accessories. Visit www.worxlandroid.com to learn more about these available accessory options.
- Page 9 COMPONENT LIST WHAT’S IN THE BOX 19.7 12.6 inch The picture is only for reference Worx Landroid Vision Power supply Charging tower 20V battery Charging base plate Magnetic strip in green* Spare blades kits Manuals Hex key RFID Screws Measurement gauge...
- Page 10 GETTING TO KNOW LANDROID VISION Cutting height adjustment USB port Battery slot Rain sensor Safety stop Interface Battery cover button High Pitched Alarm Slot Camera Charge contact The picture is only for reference...
- Page 11 TECHNICAL DATA Type WR202E (200-299 - designation of machinery, representative of Robotic lawn mower with Vision technology) WR202E No load speed (/min) 2800 /min Cutting area (m 250 m Cutting diameter (cm) 18 cm Cutting height (mm) 30-60 mm Cutting system...
- Page 12 NOISE DATA WR202E = 50.19 dB(A) A weighted sound pressure = 3 dB(A) = 58.19 dB(A) A weighted sound power = 3 dB(A) Wear ear protection when sound pressure is over 80 dB (A). A degree of noise from the machine is not avoidable. Route noisy work is to be licensed and limits for certain periods. Keep rest periods and they may need to restrict the working hours to a minimum.
- Page 13 MAINTENANCE Your Landroid Vision, works hard and needs to be cleaned and checked from time to time. This section of our guide helps you keep Landroid Vision in good shape so it can last for years without trouble. Here’s how to take care of your Landroid Vision. Switch off the machine before carrying out any service or maintenance.
- Page 14 Vision successfully charges each time. 3. Keep it charged The heart of Landroid Vision is its 20V Li-Ion Worx Powershare Battery. A. For the proper storage of the battery, make sure it is fully charged and kept in a cool dry place.
- Page 15 USB stick. B. Regularly visit the Worx Landroid Vision website to check if any new version is available. If you subscribed to Landroid Vision email list, you will be notified when a new version is available.
- Page 16 ERROR MESSAGES Sometimes things can go wrong. Fortunately Landroid Vision is smart enough to tell you if it is enountering an issue, so you can fix it. If in doubt, please visit our website where you will find useful videos and further support. MESSAGE CAUSE ACTION...
- Page 17 MESSAGE CAUSE ACTION Turn power off. Take Landroid Vision to a lawn area clear of obstacles, turn power on. Press then If the error message is still displayed: turn power off, turn Landroid Vision -E05 Error lifted upside-down and check there’s anything that can cause Landroid to be lifted up.
- Page 18 restart it. If the problem cannot be solved, please contact our Customer Service for help. TROUBLESHOOTING If your Landroid Vision does not work correctly, follow the trouble shooting guide below. If the fault persists, contact Customer Service. SYMPTOM CAUSE SOLUTION The LED light on the Check the charging station is connected properly to the charger charging pile does not...
- Page 19 SYMPTOM CAUSE SOLUTION Something is clogging in the Take off the blade disc and clean it. Maybe the grass is too high blade disc creating friction and and too thick. increasing power consumption. Landroid Vision is shaking heavily Check the blade disc and blades, remove debris and foreign Landroid Vision is starting because the blade disc is unba- objects from the blades and blade disc.
- Page 20 SYMPTOM CAUSE SOLUTION The grass is taller than 15 cm. Trim the grass to below 15 cm. Landroid Vision frequently There is grass around suspen- Lay magnetic strips or set up a 5 cm non-grass pathway around collides. ded objects such as a hanging the area.
- Page 21 We, Positec Technology (China) Co., Ltd, hereby declare, that the below product(s) covered in this document are in conformance with the applicable security requirements in Schedule 1 of The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023 (“Security Requirements”) Please note that this statement of compliance, including the Defined Support Period stated herein, is only applicable to products sold in the UK.
- Page 22 On behalf of Positec declare that the product Description Robotic Lawnmower Type WR202E (200-299 - designation of machinery, representative of Robotic lawn mower with Vision technology) (Serial number is placed on the back page) with battery charger WA3750.1 / WA3755.1 and charging base WA0515 Function...
- Page 23 On behalf of Positec declare that the product Description Robotic Lawnmower Type WR202E (200-299 - designation of machinery, representative of Robotic lawn mower with Vision technology) (Serial number is placed on the back page) with battery charger WA3750.1 / WA3755.1 and charging base WA0515 Function...
Need help?
Do you have a question about the WR202E and is the answer not in the manual?
Questions and answers