Cd Loading; Cd Care - NEC VERSA SX User Manual

T
Status LED — lights during data read operations. Do not eject the CD
or turn off the NEC Versa when the indicator is lit.

CD Loading

To insert a CD into the CD-ROM reader, follow these steps.
1. Press the Release button. The CD tray emerges a short way out of the
reader door.
2. Gently pull the tray out until you can easily position a disc in the
tray.
3. Put your CD, printed side up, into the circular impression in the tray.
4. Push the CD tray in until it clicks shut.
Note:
does not effect the CD-ROM reader.

CD Care

When handling CDs, keep the following guidelines in mind.
T
Always pick up the disc by its edges.
T
Avoid scratching or soiling the side of the disc that has no printing or
writing on it. This is the data side of the disc.
T
Do not write on or apply labels to either side of the disc.
T
Keep the disc away from direct sunlight or high temperatures.
T
Clean fingerprints or dust from the disc by wiping it with a soft cloth.
Gently brush the cloth from the center of the disc toward the edge.
Avoid using benzene, paint thinner, record cleaner,
static repellent, or any other chemical on the disc.
Chemicals and cleaners can damage the disc.
Some CDs vibrate when playing. This
! CAUTION
Using the Hardware 4-13