Table of Contents
Advertisement
configure each for a different Com port and different available interrupts under the
ports icon in the Windows Control Panel or from Device Manager in Windows 98 or
Windows 95.
In Windows NT, SystemSoft's CardWizard configures each card. Use CardWizard to
monitor PC card status in the Windows NT environment.
than others and can impact battery life. When not using any PC card, close all
applications using the card and pop it part of the way out of the slot to save power.
I'm using a PC card, the card does not work.
interrupts) to accommodate new devices. Before introducing additional devices, disable
an existing device (such as the serial port), to release an IRQ resource.
To disable a device in Windows 98, go to Start, Settings, Control Panel, System, and
select the Device Manager. To disable a device in Windows 95/NT, reboot your
system, enter the BIOS setup and access the Peripheral Setup menu.
C-4 Frequently Asked Questions
Can I run two of the same type cards simultaneously?
Yes, Windows 98 or 95 configures each card. If they are both modems,
Why do certain PC cards cause my battery life to drop noticeably?
Certain hard disk cards and wireless radio cards consume more power
If my NEC Versa LXi system is docked in the NEC Versa Dock and
When your system is docked, there are no available IRQs (system
Advertisement
Table of Contents
