Removing The Hard Disk Drive; Important Information For Windows 98 Users; Resuming From Standby Mode; Windows 98 Power Management - NEC VERSA LX AGP VIDEO Important Information Manual

Agp video
Table of Contents

Advertisement

Removing the Hard Disk Drive

When lifting the hard disk drive lever to remove and replace the hard disk drive,
lift both sides of the lever simultaneously. If you encounter any resistance when
lifting the lever, carefully loosen both sides of the lever before lifting.

Important Information for Windows 98 Users

Read this additional system information before using your NEC Versa LX (AGP
video) notebook computer with the Windows 98 operating system.

Resuming from Standby Mode

When you press the Fn-F4 key combination, your NEC Versa goes into the
Windows 98 Standby mode. Standby is a power-saving mode that saves your
current working environment to memory and shuts down most system devices.
To resume from Standby mode in the Windows 98 environment, simply slide
the Power button toward the front of the system.

Windows 98 Power Management

In the Windows 98 environment, your NEC Versa LX notebook computer only
supports Advanced Power Management (APM) which manages the power
distribution to each device and turns off the device when not in use. The NEC
Versa LX User's Guide and the NEC Help Center incorrectly state that your
NEC Versa LX with the Windows 98 operating system uses the Advanced
Configuration and Power Interface (ACPI) to manage and control devices.
Your NEC Versa LX allows you to configure device timeouts using the BIOS
setup utility or the Windows 98 power management option in the control panel.
Please note that the lowest timeout value invokes automatically, whether set in
the BIOS setup utility or the Windows 98 power management option.

Using PC Cards

Before using the Adaptec PCMCIA SCSI APA 1460 card you must:
!
Disable the computer's sound settings
!
Reassign PC card resources
!
Enable the computer's sound settings
Disabling the Computer's Sound Settings
Follow these instructions to disable the computer's sound settings.
1. Right click the My Computer icon on the desktop.
2. Click Properties and select the Device Manager tab.
3. Double click the 'Sound, video, and game controller' listing.
NEC Versa LX (AGP Video) Important Information 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versa lx

Table of Contents