NEC VERSA LX AGP VIDEO Important Information Manual page 3

Installing the Mouse Driver in Windows 98
Follow these instructions, rather than the instructions on the Application and
Driver CD, to install the NEC VersaGlide mouse driver, version 9.05, in the
Windows 98 environment.
1. Click Start, Settings, Control Panel.
2. Double click the System icon to open System Properties.
3. Select the Device Manager tab.
4. Click the plus sign next to the Mouse category and double click the device
name. (For example, Standard PS/2 Mouse.)
5. Select the driver tab and click Update Driver.
6. At the Update Driver window, click Next.
7. At the next window, select 'Display a list of all the drivers in a specific
location, so you can select the driver you want,' then click Next.
8. At the next window, select 'Have Disk.'
9. Insert the Application and Driver CD and confirm or correct the source file
path, f:\Software\98\Alps\raw (where f is the CD-ROM drive letter), then
click OK.
10. Select NEC VersaGlide (first occurrence), then click Next.
11. Windows may prompt you with the message:
Windows detects that your current driver may be a closer match for your
hardware driver than the driver you have selected.
Click Yes.
12. At the Update Driver Wizard, click Next.
13. Click Finish.
14. Click Close to exit the 'VersaGlide Properties' window.
15. Click Close to exit the 'System Properties' window.
16. Reboot your system to implement the configuration changes.
Note:
You may need to reboot your system again to activate the
mouse driver.
Upon reboot, the mouse may not yet be detected.
NEC Versa LX (AGP Video) Important Information 3