Dual Booting - NEC VERSA DOCK Manual

A - Dock/Undock button
8. If the Docking Status LED blinks amber, remove the NEC Versa
using the Dock/Undock button, reseat it, and retry docking.
9. If using the NEC Versa without an external monitor, open the LCD
panel.
10. If the system was cold docked, press the Power button on the NEC
Versa Dock to power on the NEC Versa.
11. Verify that the Docking Status LED is steady green, indicating the
NEC Versa is properly docked on the NEC Versa Dock.
Once docked, you can lock the NEC Versa onto the NEC Versa Dock
using the key provided. See the section "Locking the NEC Versa" for
details.

Dual Booting

If you have an NEC Versa that is configured in a dual boot
configuration, such as Windows 95 and Windows NT 4.0 Workstation,
be sure to reboot the system twice to ensure all drives are designated.
Pressing the Dock/Undock Button
Docking and Undocking 2-11