NEC VERSA 2600 User Manual page 70

Miscellaneous
Use this drop-down menu to set the following parameters:
T
Low battery beep (default)
This parameter lets you know when battery power is
low, by emitting a beep
T
Wake Up Alarm
Lets you specify Resume time for your NEC Versa 2600
anytime of day from Suspend mode
T
L2 Cache
Level 2 Cache speeds up your system's data processing
time, and is enabled (checked) by default.
Exit
Lets you save or not save parameter changes when you exit
Setup, as follows:
T
Save and Exit
Saves changes, but does not reboot. The changes are
effective only after the next system startup.
T
Save and Reboot
Saves changes and immediately shuts down and restarts
the system, so parameter settings take effect immedi-
ately.
T
Exit (No Save)
Exits Setup, without saving changes.
T
Default Settings
Restores all Parameter settings to their default settings.
Default settings take effect on the next system startup.
3-12 Using Setup and Power Management
once, when battery power falls to 10%, and
every 60 seconds, when battery power falls to 5%.
one time only or
everyday at the same time.