T
If playing from a device, use the Device menu to se-
lect your audio source.
If you want to use a CD-ROM reader and it does not
appear in the list, see "Adding the CD Audio Option"
in Chapter 4. This should only occur in Windows for
Workgroups systems.
Once your file is open or your source specified, press the
3.
Play button.
Press the square
4.
NOTE
justed to the mid point with the software. Then use
the volume control wheel or the controls on the ex-
ternal speakers to adjust the volume.
Using Headphones
The NEC Versa headphone port delivers sound at half a
watt. Stereo headphones plug in through the headphone jack
located on the left side of the NEC Versa. Use the audio
software that comes on your system or the volume control
wheel to adjust the volume.
Using the Built-In Speakers
The NEC Versa 2600 has built-in stereo speakers. The
built-in speakers are disabled if headphones are connected
Use the audio software that comes on your system or the
volume control wheel to adjust the volume.
button to stop playing the audio.
Stop
It is recommended that the volume be ad-
Using Multimedia 5-5