Modifying Pc Connection Settings; Setting The Infrared Connection Speed - NEC MOBILEPRO 780 User Manual

!"
Install Microsoft ActiveSync on your host PC.
!"
Create a partnership between your host PC and your
MobilePro.
!"
Verify that the desired synchronization services are
configured.

Modifying PC Connection Settings

Your MobilePro ships with PC Connection default
settings. Follow these steps to modify the PC connection
settings.
Tap Start, Settings, Control Panel, Communications.
1.
2. Select the PC Connection tab.
Select the Change tab, use the dropdown box to change
3.
the setting to Infrared port, and click OK.
Proceed to the next section to set the infrared connection
speed, if necessary.

Setting the Infrared Connection Speed

Your NEC MobilePro supports both SIR (115 Kbps) and
FIR (4 Mbps) IR communications. Follow these steps to
set the infrared connection speed.
1. Tap Start, Settings, Control Panel, and double tap Mo-
bilePro Settings.
Select the IrDA tab and select the appropriate infrared
2.
connection speed. The infrared connection speed on
your NEC MobilePro must be compatible with the in-
frared connection speed on your host PC.
3. Click OK and close the Control Panel.
Proceed to the next section to enable the infrared port on
your host PC.
1-18 Getting Started