Connecting The Pc Connect Cable - NEC MOBILEPRO 780 User Manual

Connecting the PC Connect Cable

Before installing Microsoft ActiveSync, follow these in-
structions to connect the PC Connect (serial) cable that
ships with your MobilePro to both your MobilePro and to
your host PC.
Locate and open the serial port cover on the back of
1.
your MobilePro.
Align and attach the PC Connect cable to the serial port
2.
on the MobilePro. (If your cable is labeled, insert the
cable with the word Up visible on the top. If your cable
has an arrow near the connector, insert the cable with
the arrow visible on top.)
Connect the other end of the cable to the 9-pin serial
3.
port on your host PC. If your host PC has a 25-pin se-
rial port, use an adapter (available in most computer
stores).
Proceed to the next section to install Microsoft Active-
Sync.
Connecting the PC Connect cable
Getting Started 1-13