NOTE
additional options that allow you to specify the Base
I/O
configuring.
T
Mode (Serial Port B)
If installed, this option sets the mode for "Serial Port B"
to "Normal."
T
Parallel Port
This option configures the system's parallel port.
Choose "Auto" (default), "Enabled" or "Disabled." The
"Auto" setting causes the Setup program to assign
LPT 1 378h, IRQ7.
NOTE
additional options that allow you to specify the Base
I/O
configuring.
T
Mode (Parallel Port)
This option sets the mode for the parallel port. The
options include "Output Only" (AT-compatible mode),
"Bidirectional" (PS/2-compatible mode), "EPP"
(Extended Parallel Port – high speed bidirectional) and
"ECP" (Enhanced Capabilities Port – high speed
bidirectional).
4-14 System BIOS and Utilities
If you select the Enabled option, you'll see
address and
IRQs for
If you select the Enabled option, you'll see
address and IRQs for
the
port
you're
the
port
you're