Canon PIXMA MX922 Setting Manual

Fax Easy Setup

If you started Fax Easy Setup, on the fax machine's operation panel, and prefer to go through this image-friendly version...

Step 1
Press the FAX button at any screen to go to fax standby mode.

Step 2
Click Next to proceed through the setup.

Connecting The Phone Lines

Connecting Your Phone/Answering Machine

Is your answering machine built into your phone?

Fax to Phone Line Connection

• Plug the provided phone cord into the wall jack
  

• Plug the provided phone cord into the "LINE" jack located on the rear of the multifunction.
  

• Remove the white plug from the upper jack labeled "EXT."
  

• Plug the second phone cord into the "EXT." jack located on the rear of the multifunction
  

• Plug the second phone cord into the answering machine.
  

• Plug the third phone cord into the answering machine.
  

• Plug the third phone cord into the phone.
  

• Plug the provided phone cord into the wall jack
  

• Plug the provided phone cord into the "LINE" jack located on the rear of the multifunction
  

• Remove the white plug from the upper jack labeled "EXT."
  

• Plug the second phone cord into the "EXT." jack located on the rear of the multifunction
  

• Plug the second phone cord into the phone
  

Setting Up The Receive Mode

Step 1
Turn on the MX922 by pressing the ON button if the machine is not powered on already.

Step 2
Press the FAX button.

Step 3
The fax standby screen will appear.

Step 4
Press the center FUNCTION button.

Step 5
The Receive mode settings screen will appear.

Step 6
Use the UP or Down button to highlight "TEL priority mode".

Step 7
Press the right FUNCTION button under the Advanced label.

Step 8
The Advanced screen will appear.

Step 9
Use the UP or DOWN button to select "User-friendly reception".

Step 10
Press the OK button.

Step 11
The User-friendly reception screen will appear.

Step 12
Use the UP or DOWN button to select "ON".

Step 13
Press the OK button.

Step 14
The screen will quickly flash "Userfriendly reception ON".

Step 15
The screen will return to the Advanced window.

Step 16
Press the Back button to return to Receive mode settings window.

Step 17
Confirm "TEL priority mode" is highlighted and then press the OK button.

Step 18
You will return to the "Fax standby screen" and 'TEL priority' will appear on the screen.

Receiving A Fax

To receive a fax:

• Pick up the handset on the phone connected to the MX922.
• Listen for fax tones.
• When the tones stop hang up the handset.
• The MX922 will receive the fax document.

To receive a fax while you are away:

• The answering machine will answer the call.
• If fax tones are heard by the MX922 it will take over the call and receive the fax document.

In order to receive a fax, you must either pick up the handset on a phone that is connected to the MX922 or let your answering machine answer the call.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Canon PIXMA MX922 Setting Manual