iGPSPORT BSC100S Manual
  1. Manuals
  2. Brands
  3. iGPSPORT Manuals
  4. Bicycle Accessories
  5. BSC100S
  6. Quick start manual

iGPSPORT BSC100S Manual

Advertisement

Table of Contents
Contents
iGPSPORT BSC100S Manual

BUTTONS

Button Function
Left Button Short press to power on/long press to power off.
Short press to start/pause ride recording.
Right Button Short press to switch data page.
Long press to save tie ride record when riding recording.
Long press to enter GPS bike computer setting mode when not riding recording.

ICONS

Icons Description
Satellite signal
Bluetooth
Pause
Recording
Incoming call alert
Battery
Speedometer (displayed when sensor is connected)

GPS BIKE COMPUTER SETTING MODE

  • Long press the right button to enter the setting mode (E1~E5), and short press the tight button in the setting mode to switch between E1 and E5.
  • When the E1~E5 icons are flashing, short press the left button to enter the corresponding setting state.
  • Press and hold the right button for 2s to save and exit the setting mode.
  • The settings are automatically saved after 10 seconds of no button operation in the setting mode.
Function Operation Method Notice
E1 Unpair phone
  1. When E1 is flashing, short press the left button to unpair the phone, and the device will restart automatically.
E2 Set time zone
  1. Enter E2, short press the left button to select the time zone, short press the right button to set the number.
  1. Default time zone: UTC/GMT+00:00 (please set the time zone).
E3 Connect the sensor
  1. Enter E3, the device automatically searches for sensors, and the sensor symbol keeps flashing.
  2. After the sensor is connected, the corresponding value will be displayed.
  3. After entering the sensor search state for 30s, it will automatically exit the setting mode.
  1. The sensor needs to be searched and connected again after replacing the battery.
E4 Set wheel diameter
  1. Enter E4, sort press the left button to switch the number of digits, short press the right button to set the value.
  1. Use the speed sensor to set wheel diameter.
  2. Default wheel diameter: 2096mm.
E5 Set metric and imperial units
  1. Enter E5, short press the right button to switch between metric and imperial (miles) units.
  1. Default unit: Metric (km).

PAIRED PHONE

Pairing the phone for the first time.

  1. Download the iGPSPORT APP.
  2. Tum on the Bluetooth of the mobile phone, and use the iGPSPORT APP to pair the device.
  3. The BSC100S Bluetooth icon shows that it has been paired and connected.
  4. After the GPS bike computer is connected to the iGPSPORT APP, more functions can be used.
Function Description
Data Management Synchronize cycling activities to the cloud.
Smart Notifications Incoming call.
Sensor Settings More convenient sensor connection.
Page Configuration Customize configuration page data, a variety of recommended schemes to choose from.
Alert Settings Alert reminders that support multiple data.
Automatic Function Automatic start, automatic pause, automatic lap counting, automatic page turning and various auxiliary functions, convenient for riding.

PACKING LIST

  • BSC100S x 1
  • User manual x 1
  • Standard base x 1

CONTACT US

www.igpsport.corn

(86)027-87835568

service@igpsport.corn

INSTALL THE BASE FOR YOU BSC100S

Secure the computer base to the handlebar by using the included rubber ring.

  1. Install the rubber pad on the back of the computer base.
    INSTALL THE BASE - Step 1
  2. Choose a suitable location on the handlebar to place the rubber pads and computer base.
    INSTALL THE BASE - Step 2
  3. Choose a suitable location on the handlebar to place the rubber pads and computer base.
    INSTALL THE BASE - Step 3
  4. Align the tab protrusions on the back of the computer with the slots on the base of the computer.
    INSTALL THE BASE - Step 4
  5. Place the stopwatch on the stopwatch base and rotate it 90 degrees.

warning Notes:

  • You can also use the iGPSPORT M80/S80 and the other model computer extension brackets to mount the computer.
  • It is recommended that you use the iGPSPORT official computer base or extension bracket to avoid damaging the computer buckle.

SPECIFICATIONS

Operating Temperature: -10ºC~50ºC

www.igpsport.com

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download iGPSPORT BSC100S Manual

Advertisement

Need help?

Need help?

Do you have a question about the BSC100S and is the answer not in the manual?

Questions and answers

Related Manuals for iGPSPORT BSC100S

Save Article as PDF

Table of Contents