ECOVACS GOAT Instruction Manual page 16

Panel Display Reads:
Display
Standing by� No task assigned
Current Battery Level (For example, the
number shown in the image represents the
current battery level as 100%�)
STOP
GOAT is paused� Please press Start + OK to
continue working, or Charge + OK to return
to the charging station�
ON
GOAT is working
OTA
GOAT is undergoing OTA updates
E and a 3-digit Error Code�
Go to the Troubleshooting section of this
manual or visit https://www�ecovacs�com/
global for the meaning of the Error Code
messages and recommended solutions�
EN 16
Description
1.Start GOAT:
Press and hold [OK] for 3 seconds on GOAT and the digital tube display
will flash as below�
Note:
Your GOAT will be automatically powered on when it docks at the Station�
2.Set PIN Code:
The PIN code you set for your GOAT at the very beginning is used to
prevent the device from being stolen or operated by children�
When the GOAT is off map or to be powered on or reset, it will
automatically be locked� You can unlock it by entering the right PIN
code�
Set the PIN code when the display shows as below�
Press [+] or [-] to select the PIN code numbers one by one� After the
first digit is decided, press [OK] to comfirm, and the cursor will move to
the next digit�
Repeat until all 4 digits are comfirmed and the display will show a new
PIN code input page with at the left top corner� Now enter the PIN
code you just set to comfirm and unlock your GOAT�
Note:
*0000 is an invalid PIN code�
*PIN code is to be entered twice to confirm the setting�
*If you enter the wrong numbers while setting the PIN code, the setting process
will start all over again�
*You may change the PIN code on the App�