Related Manuals for Levoit Vital 100S-P
Summary of Contents for Levoit Vital 100S-P
- Page 1 U SER MANUA L Vital 100S-P Smart Air Purifier Questions or Concerns? Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at support@levoit.com or at 1-888-726-8520.
- Page 2 Table of Contents Specifications Package Contents Model LAP-V102S-AUSR Specifications Power Supply Safety Information 1.5A Getting to Know Your Smart Air Purifier Rated Power Controls & Display Operating Temperature: 14°–104°F / Getting Started Conditions Using Your Smart Air Purifier -10°–40°C About the Filter Humidity: ≤...
- Page 3 READ AND SAVE THESE INSTRUCTIONS SAFETY INFORMATION To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines. General Safety Do not sit or place heavy objects on the • air purifier. Only use your air purifier as described in •...
- Page 4 VeSync and other third-party apps. Electromagnetic Fields (EMF) Your Levoit air purifier complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.
- Page 5 G E T T I N G TO K N OW YO U R S M A R T A I R P U R I F I E R Check Filter Indicator Display Lock Button Fan Speed Indicators Timer Button Auto Mode Button Pet Mode Button On/Off Button...
- Page 6 C O N T R O L S & D I S P L AY Note: You can also use the VeSync app to control these functions, as well as additional app-only features (see page 13). Auto Mode Button On/Off Button •...
- Page 7 CONTROLS & DISPLAY (CONT.) G E T T I N G S TA R T E D Place the air purifier on a flat, stable Display Lock Button & surface such as the floor. Indicator • Prevents current settings 2. Pull both sides of the front cover to from being changed (see remove it.
- Page 8 GETTING STARTED (CONT.) 4. Remove the Main / Activated Carbon 6. Place the front cover on the air purifier. Filter from inside the air purifier. Make sure to align the tabs on the cover with the slots on the bottom of the air 5.
- Page 9 VeSync App Setup Wi-Fi® Connection • To disconnect Wi-Fi®, press and hold Note: The VeSync app is continually being 15 seconds until the Wi-Fi indicator turns improved and may change over time. If there are off. This will restore the smart air purifier’s any differences, follow the in-app instructions.
- Page 10 U S I N G YO U R S M A R T A I R P U R I F I E R Note: Using the VeSync app allows you to control Note: your air purifier remotely and access additional •...
- Page 11 USING YOUR SMART AIR PURIFIER (CONT.) Timer Light Detection You can manually set the timer for 2, 4, or 8 The light sensor is off by default. You hours using the button. You can also set can turn on/off Light Detection in the the timer for 1–24 hours through the VeSync Vesync APP.
- Page 12 USING YOUR SMART AIR PURIFIER (CONT.) Pet Mode Display Lock Pet Mode is efficient at filtering allergens from When the air purifier is on, you can lock the air while conserving energy. the display to prevent settings from being accidentally changed. Buttons will not respond to being tapped.
- Page 13 USING YOUR SMART AIR PURIFIER (CONT.) VeSync App Functions Note: Efficient Auto Mode is useful for purifying odors from the air. The air purifier’s dust sensor can only detect particles in the air, not smells. • The VeSync app allows you to access Efficient Auto Mode does not rely on the dust additional smart air purifier functions, sensor, but the room size instead.
- Page 14 A B O U T T H E F I LT E R The air purifier uses a 3-stage filtration system to purify air. A. Washable Pre-Filter C. High-Efficiency Activated Carbon Filter • Captures large particles such as dust, • Physically adsorbs smoke, odors, and lint, fibers, hair, and pet fur.
- Page 15 Humidity Moisture may damage the filter. This air purifier should be used in an area with a humidity level 85% RH or below. If you use the air purifier in excessively humid areas, the surface of the filter may become moldy. Note: Water or moisture will allow mold to grow.
- Page 16 C A R E & M A I N T E N A N C E Cleaning the Smart Air Purifier Resetting the Check Filter Indicator • Unplug before cleaning. Reset the Check Filter Indicator when: • Wipe the outside of the air purifier with a soft, dry cloth.
- Page 17 CARE & MAINTENANCE (CONT.) Cleaning the Pre-Filter 5. Rinse the pre-filter with water under a faucet. 6. Wash the pre-filter with mild detergent The Washable Pre-Filter should be cleaned and a soft cloth. [Figure 2.2] approximately every 2–4 weeks to increase efficiency and extend the life of your filter.
- Page 18 Check Filter Indicator (see page 16). after removing the pre-filter Note: • To maintain the performance of your air purifier, only use official Levoit filters. For more information, contact Customer Support (see page 26). • Remember to reset the Check Filter Indicator after replacing the filter (see page 16).
- Page 19 CARE & MAINTENANCE (CONT.) Cleaning the Dust Sensor 4. Wipe the lens dry with a dry cotton swab. 5. Replace the dust sensor cover. It is recommended to clean the AirSight™ Infrared Dust Sensor at least lens every 2 Note: Do not remove the foam piece months to help maintain the efficiency of attached to the dust sensor cover...
- Page 20 T R O U B L E S H O OT I N G Problem Possible Solution Air purifier will not turn on or Plug in the air purifier. respond to button controls. Check to see if the power cord is damaged. If it is, stop using the air purifier and contact Customer Support (see page 26).
- Page 21 TROUBLESHOOTING (CONT.) Problem Possible Solution Strange smell coming from Clean the filter, or replace if necessary. the air purifier. Contact Customer Support (see page 26). Make sure not to use your air purifier in an area with high humidity or while diffusing essential oils. Air Quality Indicator always Clean the dust sensor lens (see page 19).
- Page 22 V E S Y N C A P P T R O U B L E S H O OT I N G My smart air purifier isn’t connecting to the VeSync app. • Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device.
- Page 23 O F C O N F O R M I T Y Arovast Corporation hereby declares that this equipment is in compliance with the FCC requirements. The declaration of conformity may be consulted in the support section of our website, accessible from www.levoit.com...
- Page 24 Levoit store, (ii) repair any defects in material • Incidental and consequential damages. or workmanship, (iii) replace the product with another •...
- Page 25 WARRANTY INFORMATION (CONT.) AROVAST CORPORATION OR ANY OTHER PARTY IS JURISDICTIONS YOU HAVE ONLY THE IMPLIED AUTHORIZED TO MAKE ANY WARRANTY IN ADDITION WARRANTIES THAT ARE EXPRESSLY REQUIRED TO TO THE LIMITED WARRANTY IN THIS LIMITED BE PROVIDED IN ACCORDANCE WITH APPLICABLE PRODUCT WARRANTY STATEMENT.
- Page 26 C U S TO M E R S U P P O R T If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Email: support@levoit.com Toll-Free: 1-888-726-8520 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support.
- Page 27 N OT E S...
- Page 28 A4_24H19 us retail...
Need help?
Do you have a question about the Vital 100S-P and is the answer not in the manual?
Questions and answers