Supermicro X14SAE User Manual page 65

COM Header
There is one COM header at COM1 on the X14SAE/X14SAE-F motherboard. Use a cable with
the COM header to access the COM1 COM port. COM ports provide serial communication
support.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under
Reference" on page 13.
DOM Power Connector
The Disk-On-Module (DOM) power connector, located at JSD1, provides 5V power to a solid
state DOM storage device connected to one of the SATA ports.
For a detailed diagram of the X14SAE/X14SAE-F motherboard, see the layout under
Reference" on page 13.
Fan Headers
There are seven 4-pin fan headers (FAN1, FAN1A, FAN2B, FANA, FAN2, FAN3, and FAN3C)
on the X14SAE/X14SAE-F motherboard. Although pins 1-3 of the system fan headers are
backwards compatible with the traditional 3-pin fans, the 4-pin fans are recommended to take
advantage of the fan speed control. This allows fan speeds to be automatically adjusted based
on the motherboard temperature.
X14SAE/X14SAE-F: Component Installation
COM Header
Pin Definitions: Nine Total
Pin# Definition Pin#
1 SP_DCD0 6
2 SP_RXD0 7
3 SP_TXD0 8
4 SP_DTR0 9
5 GND
DOM Power Connector
Pin Definitions: Three Total
Pin#
1 +5 V
2 GND
3 GND
65
Definition
SP_DSR0
SP_RTS0
SP_CTS0
SP_RI0
Definition
"Quick
"Quick