Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pulse Performance Products Manuals
  4. Scooter
  5. FREEWHEEL 200s
  6. Owner's manual

Pulse Performance Products FREEWHEEL 200s Owner's Manual

With integrated bluetooth speaker
Hide thumbs

Advertisement

Quick Links

Download this manual
THROTTLE, ELECTRIC POWER WILL ENGAGE THE MOTOR FOR ADDED
POWER AND ACCELERATION. YOUR RIDE TIME WILL VARY GREATLY
DEPENDING ON THE AMOUNT OF POWER-ASSISTED RIDING PERFORMED.
ELECTRIC SCOOTER
OWNER'S MANUAL
FOR USE WITH THE FOLLOWING PULSE PERFORMANCE PRODUCTS™ SCOOTERS
•
FREEWHEEL 200s (with integrated Bluetooth
DO NOT RETURN TO STORE! QUESTIONS OR COMMENTS?
CALL (866)-434-6067
07.19.19
Speaker)
™

Advertisement

loading
Need help?

Need help?

Do you have a question about the FREEWHEEL 200s and is the answer not in the manual?

Questions and answers

Related Manuals for Pulse Performance Products FREEWHEEL 200s

Summary of Contents for Pulse Performance Products FREEWHEEL 200s

  • Page 1 THROTTLE, ELECTRIC POWER WILL ENGAGE THE MOTOR FOR ADDED POWER AND ACCELERATION. YOUR RIDE TIME WILL VARY GREATLY DEPENDING ON THE AMOUNT OF POWER-ASSISTED RIDING PERFORMED. ELECTRIC SCOOTER OWNER’S MANUAL FOR USE WITH THE FOLLOWING PULSE PERFORMANCE PRODUCTS™ SCOOTERS • FREEWHEEL 200s (with integrated Bluetooth Speaker) ™...
  • Page 2 Pulse Performance Products™ advises that you periodically review and reinforce all information in this manual with all riders, and that you inspect and maintain your scooter to insure their safety.
  • Page 3 Safety and Warnings WARNING: FAILURE TO HEED TO THE WARNINGS LISTED BELOW INCREASES RISK OF POTENTIAL SERIOUS INJURY. USE THE APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR PROTECTIVE GEAR. Maintain a hold with both hands on the handlebars at all times. Never allow more than one person at a time to ride the scooter.
  • Page 4 3 mm hex wrench (not included) WARNING: DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ PRODUCTS WITH YOUR Altering of the original components may or may not be compatible with the design and will void the warranty. Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
  • Page 5 Assembly Handlebar Steer Tube Assembly Tools required: 5 mm hex wrench, 10 mm wrench Locator Hole 1. Depress the push button located on the 2. Tighten the bolts with the 5 mm hex rear of the fork tube and insert the handlebar wrench and 10 mm wrench.
  • Page 6 Assembly Charging the Battery WARNING: Battery must be fully charged before you ride your electric scooter Required components: battery charger • Initial battery charge time - 12 hours • Recharges after initial charge - up to 10 hours • When scooter is not in regular use batteries need to be charged on a monthly basis to maximize performance 1.
  • Page 7 Hardware Maintenance Brake Check the brakes for proper function. When you step on the brake it should provide positive braking action. When you apply the brake with the speed control on, the brake cut off switch should stop the motor. Frame, Fork, Handlebars &...
  • Page 8 Step 1. Make sure your phone or audio device is on, and the Bluetooth™ function is enabled. Step 2. Turn on your Freewheel 200s Scooter, and listen for the 8 tones, followed by the words “Bluetooth Mode”. Step 3. Your device should give you an option to PAIR with Bluetooth™ device FWBT200.
  • Page 9 Repair and Maintenance Rear Wheel-Transmission-Motor Assembly Replacement Tools required: two [2] 13 mm wrenches, phillips screwdriver 1. Using a #2 phillips screwdriver, remove the 5 deck screws and lift the deck away by shifting it up and towards the rear of the scooter, allowing the deck to slip off of the brake pedal.
  • Page 10 Repair and Maintenance Front Wheel Replacement Tools required: Two 5mm hex wrenches 1. Using two 5 mm hex wrenches loosen 2. Reinstall new replacement wheel 3. Reinstall hardware and tighten clockwise and remove the front axle by turning the ensuring to note the order and location of all with a 5 mm hex wrench.
  • Page 11 Troubleshooting Problem Possible Cause Solution Scooter will not run. Battery is not charged. Fully charge the battery. First charge should be 12 hours and up to 10 hours for recharges. Wires or connectors are Check to ensure that charger is tightly plugged into both the wall loose or unplugged.
  • Page 12 Scooter Components PART DESCRIPTION 1. Frame 2. Motor 3. Front Fork & Rotation Limit Screw 4. Headset (Upper & Lower) 5. Clamp 6. Kickstand 7. Battery Box 8. Deck 9. Rear Wheel 10. Front Wheel 11. Spring Plate 12. Foot Brake 13.
  • Page 13 The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product. Pulse Performance Products™ does not offer an extended warranty. If you have purchased an extended warranty, it must be honored by the store at which the scooter was purchased from.
  • Page 14 Pulse Performance Products™ A Division of Bravo Sports™ 12801 Carmenita Rd. Santa Fe Springs, CA 90670 © 2019 - 2020 Pulse Performance Products™ - All Rights Reserved...