QCY T17 Manual

Table of Contents

Contents

QCY T17 Manual

Overview

Choose the EarTips that fit your ears best.

When using for the first time:

Activate the earphone by removing them from the charging case and putting them back.
Remove the earphone from the charging case again, they will switch on automatically and pair with each other.
Select "QCY-T17" on your device's Bluetooth list to connect.

BUTTON CONTROLS
X2: Tap Twice
X3: Tap Triple
1.5": Press and hold for 1.5 seconds

Factory Resetting
Reset if the earbuds cannot properly pair with each other or with other devices.

Place the earbuds into the charging case and leave the case open.
Press and hold the button on the case for 10 seconds until the LED indicators inside the charging case rapidly flash White 5 times This confirms that the reset was successful and your earbuds can be connected normally

12 month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product.

View the FAQS on QCY-T17-FAQ

How to care for your earbuds

DO not disassemble. Avoid Dropping
Use original or certified cables.
Keep away from children or pets. Small parts included may be a choking hazard
The earbuds need to be fully charged prior to first-time use If you do not use it for more than 2 months, please charge and maintain it regularly for safe operation.
Do not put it under extreme temperatures, such as below 10 degrees Celsius or above 60 degrees Celsius
Do not expose the product to strong sunlight fire or throw it into the fire to avoid an explosion
Do not use the product outdoors during thunderstorms to avoid malfuntion or electric shock
Do not use chemicals or strong detergents to clean the earbuds