Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 63

Sleep/Standby or Hibernation Functions
Windows XP
To enter standby, click [start] - [Turn Off Computer] - [Stand By]. To enter hibernation, click [start] - [Turn Off
Computer], then press and hold Shift and click [Hibernate].
CAUTION
While the computer is entering
Do not:
• Touch the keyboard, Touch Pad, screen, tablet buttons (only for CF-C1 Series), or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• <CF-S10 Series>
Operate the drive power/open switch.
• Operate the wireless switch.
• Close or open the display.
• Insert and remove the SD Memory Card.
Wait until the power indicator blinks green (
It may take one or two minutes to enter
nothing is displayed on the screen.
After releasing the switch, do not operate it until the power indicator blinks or goes off.
If you slide and hold the power switch for longer than four seconds, the computer will forcibly shut down
Windows 7
and unsaved data will be lost even if you have set [When I press the power button:] to [Shut down] in [Choose what the
power button does].
If you slide and hold the power switch for longer than four seconds, the computer will forcibly shut down
Windows XP
and unsaved data will be lost even if you have set [Shut down] in [When I press the power button on my computer:]
( page 60 "Setting Sleep/Standby or Hibernates").
In sleep/
Windows 7
Windows XP
Do not attach or remove a peripheral device. Doing so may cause malfunction.
Power is consumed in
inserted. When power is exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the
Windows 7 sleep/
Windows XP
sleep/
Windows 7
Windows XP
Windows 7
Windows 7
standby or hibernation
sleep/
Windows 7
Windows XP
standby function.
standby or hibernation
sleep/ standby) or goes off (hibernation).
Windows XP
sleep/ standby or hibernation. Simply wait though
Windows XP
standby. Power consumption may increase when a PC Card is
63