Panasonic PT-D10000 Operating Instructions Manual page 82

Option2 settings (continued)
Setting the startup logo
This sets the startup logo that is projected when the
power is turned on.
1. Press ▲▼ to select "STARTUP
LOGO".
OPTION2 OPTION2
PROJECTOR ID PROJECTOR ID
INSTALLATION INSTALLATION
ALTITUDE ALTITUDE
DIRECTION DIRECTION
LAMP SELECT LAMP SELECT
LAMP RELAY LAMP RELAY
RS-232C RS-232C
SYSTEM INFORMATION SYSTEM INFORMATION
AIR FILTER CLEANING AIR FILTER CLEANING
DATE AND TIME DATE AND TIME
STARTUP LOGO STARTUP LOGO
PASSWORD PASSWORD
MENU SELECT MENU SELECT
CHANGE CHANGE
2. Press ◄► to switch "STARTUP
LOGO".
• The setting will change as follows each time
◄► is pressed.
LOGO3
LOGO2
• LOGO3:
The Panasonic logo and DIGITAL
PROJECTOR logo are projected.
• OFF:
No startup logo is projected.
• LOGO1:
The picture registered by the user will be
projected.
• LOGO2:
The picture registered by the user will be
projected.
Note
• Separate software is required in order to create the
pictures to use for "LOGO1" and "LOGO2". Consult
your dealer.
82
– ENGLISH
2 2
FRONT-F FRONT-F
LOW LOW
H H
QUAD QUAD
OFF OFF
LOGO1 LOGO1
OFF
LOGO1
Password
This function is used by a service person.
Input the password with the numeric buttons (0 to 9)
of the remote control and press ENTER to confirm the
entry.