Panasonic Viera TC-22LR30 Operating Instructions Manual page 75

Lcd tv / dvd-recorder combination
Hide thumbs Also See for Viera TC-22LR30:
Table of Contents

Advertisement

PROBLEM
The display is dim...
"12:00" is flashing on the unit's display...
The recording time display, the transfer
(dubbing) process display and the displayed
recording time of MP3 are different from the
actual time...
TV sometimes makes a cracking sound...
The main unit is hot.
Poor Video...
(Snow noise, no picture, picture runs, etc.)
Poor Audio...
If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1-800-211-PANA(7262).
To locate an authorized servicenter call toll free 1-800-211-PANA(7262)
or, contact us via the web at:http://www.panasonic.com/contactinfo
• Change "FRONT DISPLAY" in the OTHER ADJUST menu.
• Set the clock.
• The time on the unit's display and the remaining recording time on the screen may be
indicated less or more than the actual value.
• In DVD-R, the remaining capacity does not increase even if programs are erased.
• If you repeat recording or editing 200 times or more, the remaining capacity of the
DVD-R is reduced and then recording or editing may be disabled.
• The time during fast forward and rewind, or the process during transfer (dubbing) may
not be displayed accurately.
• If there is no problem with picture or audio, this sound is a result of normal cabinet
shrinkage due to changes in room temperature. This will not effect performance, etc.
• The main unit radiates heat and some of the parts may become hot. This is not a
problem for performance or quality. Set up at a location with good ventilation. Do not
cover the ventilation holes of the TV with a tablecloth etc., and do not place on top of
other equipment.
• HDMI cable is not connected securely.
• Turn the power supply of the TV set and connected equipment OFF then turn on.
• Check compatibility of input signal from the connected equipment.
• The connected equipment must be EIA/CEA-861/861B compliant.
• Change the audio setting of the connected equipment to L.PCM.
• Check the setting of HDMI INPUT.
• If the problem is due to the digital audio connection, change to the analog audio
connection.
CORRECTION
Page
33
23
17
17
17
17
17
18
75

Advertisement

Table of Contents
loading

Table of Contents