JVC Everio GZ-MC500AA Instructions Manual page 84

The video MOD file of the camera can be
viewed using one of the methods below.
(1) Drag and drop the MOD file to the
PowerDVD 5 NE icon.
(2) Start PowerDVD 5 NE, and then drag and
drop the MOD file to the screen window.
(3) Start PowerDVD 5 NE, and then click [
on the operation panel, select [Open media
files] from the pull-down menu, and then
add the MOD file that you want to play to
the play list for playback.
NOTES:
*1 If the video is [ULTRA FINE], [FINE], or
[NORMAL], select [High Quality NTSC (or PAL)
DVD].
If the video is [ECONOMY], select [Long Play
NTSC (or PAL) DVD].
Encoding is not performed on unedited video, and
]
high-speed processing is performed at the original
image quality.
*2 Insert a check mark for [Use SVRT to save
rendering time]. The minimum required encoding
is performed, and high-speed processing is
performed while keeping the original image
quality.
*3 Before using PowerProducer 2 Gold NE, be sure
to load a blank DVD media into the recordable
DVD drive. Processing will stop if no blank DVD
media is loaded.
*4 The correlation between the modes in [QUALITY]
of camera setting and PowerProducer 2 Gold NE
is shown below. Usage in the mode corresponding
to the video is recommended if possible.
[QUALITY] of
camera setting
ULTRA FINE
FINE
NORMAL
ECONOMY
*5 To modify the menu, click [Customize Menu] of
[Actions].
– 20 –
PowerProducer 2
Gold NE
HQ
XP
SP
EP