JVC Everio GZ-MC500AA Instructions Manual page 56

56
REFERENCES
EN
NUMBER OF FOLDERS OVERFLOW
Appears when the number of folders exceeds
the limit for file copy/move operation.
MEMORY CARD ERROR!
REINSERT CARD OR CHANGE CARD
Appears when the camera does not recognise
the loaded recording medium. Remove the
medium once and insert it again or replace with
another medium.
(
FILE SYSTEM MAY HAVE PROBLEM
FORMAT IS RECOMMENDED AFTER
COPYING WANTED DATA
The file system of the recording medium may
have a problem. It is recommended to copy the
data for backup, then format the medium.
( pg. 19)
VIDEO MANAGEMENT FILE IS BROKEN
TO RECORD/PLAYBACK VIDEO, RECOVERY
IS REQUIRED
The video management file is broken. Recovery
is required to record or play back video files.
Select [YES] with the multi-controller (r/t),
then press 49 to recover the video
management file. If the desired video file is not
displayed on the video index screen in spite of
the file recovery, the file is moved to the
[EXTMOV] folder. Press the recording start/stop
button on the index screen to display [MPG], and
then select the desired file.
NO VIDEO MANAGEMENT FILE
VIDEO FILES HAVE BEEN MOVED TO MPEG
FOLDER
The data cannot be recorded properly, or the
video management file is deleted or not found.
Video files have been moved to MPEG
(EXTMOV) folder. (
PLAY LIST'S MANAGEMENT INFORMATION
IS BROKEN
REMAKE PLAY LIST AGAIN
The management information of play list is
broken. Create the play list again. (
pg. 17,
18)
pg. 20)
pg. 43)
NO REGISTERED SCENES IN PLAY LIST
SOME OF SCENES MAY NOT BE PLAYED
BACK
The video files registered in the play list do not
exist. Some of the scenes may not be played
back.
REGISTERED SCENES IN PLAY LIST IS
EMPTY
THIS PLAY LIST WILL BE DELETED
There is no scenes registered in the play list.
The play list will be deleted.
CAMERA TEMPERATURE IS GOING UP
TURN CAMERA OFF, PLEASE WAIT
The temperature of the camera is too high. Turn
off the power, then wait for a while.
CAMERA TEMPERATURE IS TOO LOW
KEEP CAMERA POWER ON, PLEASE WAIT
The temperature of the camera is too low. Keep
the power on and wait for a while.
RECORDING FAILURE
Performance of recording medium is poor. Use
the Cleanup function [CLEAN UP] in the menu.
( pg. 41, 49)
The writing speed of recording medium is slow,
or the recording medium is corrupted. Use the
recording medium to which the operation is
guaranteed. See page 62 for the guaranteed
media to work with this camera.
The recording medium was subjected to
vibrations or jolts. Be careful not to subject the
recording medium to vibrations or jolts.
RECORDING MAY NOT BE CORRECT ON
THE MEMORY CARD
The data may not be recorded on the recording
medium correctly. Try recording again.
Otherwise, clean up the recording medium.
( pg. 41, 49)
MEMORY CARD CANNOT BE PLAYED BACK
CORRECTLY
The recording medium cannot be played back
correctly. Try playback again.
CANNOT USE IN VIDEO MODE
The operation is not available in the video mode.