HP Compaq Presario,Presario 7479 Supplementary Manual page 61

To run a test, complete the following steps:
1.
2.
3.
* * * *
HINT: You can select Quick or Complete as a starting point for a Custom test. If you select
Interactive Mode, stay with your computer for the interactive test portions.
4.
When the tests are complete, the progress bar in the Status window will be green if
the test was successful and red if the test failed. The lower part of this tab gives
details of the tests that have been completed.
The Log tab lists all the tests and also gives information about the number of times
each test was run, the time taken for the test, and the number of errors detected. To
save this information, click the Save button at the bottom of the window.
The Error tab provides details about the errors detected, including error codes. This
code is useful information for a Compaq technician who can advise you on how to fix
your computer.
6-8
Click the Test tab.
Choose the type of test: Quick, Complete, or Custom. In Custom, you will
need to check the boxes in the Component List for each test you want.
Select Interactive Mode or Unattended Mode.
Click the Begin Test button at the bottom of the window. The Status tab will
automatically replace the Test tab on your window. You can follow the progress
of individual tests on this window.
Understanding Your Service and Support Options