Installation And Connections; Attaching The Controller; Using The Controller Separately From The Main Unit; D Detaching From The Main Unit - Icom IC-PW2 Instruction Manual

2

INSTALLATION AND CONNECTIONS

Attaching the controller

1. Insert the bottom of the controller into the
projection ( 1 ).
2. Push the controller in the direction of the arrow
( 2 ) until the panel is locked and makes a 'click'
sound.
CAUTION: DO NOT push on the LCD display when
attaching the controller to the main unit. This could
damage the display.
1
1
2
Using the controller separately
from the main unit

D Detaching from the main unit

1. Push the release button ( 1 ) until the controller
tilts forward ( 2 ), and then remove the controller.
2. Insert the bottom of the dummy panel into the
projection ( 1 ).
3. Push the panel in the direction of the arrow until
the panel is locked and makes a 'click' sound.
2-1
Release button
1
2
1
1