Querying Measurement Results; Continuous Average Measurement Results - Rohde & Schwarz NRP T Series User Manual

®
R&S NRPxxT(N)
<data[,length]>

9.9 Querying measurement results

After the measurement, you can query the measurement results.

9.9.1 Continuous average measurement results

FETCh<Sensor>:ARRay[:POWer][:AVG]?
FETCh<Sensor>[:SCALar][:POWer][:AVG]?
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:DATA?
FETCh<Sensor>:ARRay[:POWer][:AVG]?
Queries the last valid measurement result of a buffered continuous average measure-
ment.
Suffix:
<Sensor>
Usage:
FETCh<Sensor>[:SCALar][:POWer][:AVG]?
Queries the last valid measurement result of the measurand that was configured
before.
Suffix:
<Sensor>
Usage:
User Manual 1177.6023.02 ─ 15
32 | 64
32-bit or 64-bit
If you omit the length, the sensor sets the last used length.
Example for REAL,32 format:
#6768000....<binary float values>....
Example for REAL,64 format:
#71536000....<binary float values>....
<ASCii[,0 to 12]>
ASCii
List of comma-separated, readable values.
[,0 to 12]
Defines the number of decimal places.
The reset value 0 does not restrict the number of decimal pla-
ces.
Example for ASCii,4 format:
1.2938e-06, -4.7269e-11, ...
*RST: ASCii,0
......................................................................... 111
...................................................................... 111
.
1
Query only
.
1
Query only
Remote control commands
Querying measurement results
............................................................ 112
111