Statement General Introduction Please read this manual carefully before using the The WiTalk9 SE system, a full-duplex wireless intercom product and strictly operate & store it in accordance headset system, operates in the 2.4 GHz band and with the instructions. Please save the manual for your provides a reliable transmission range up to 350 m.
Available Packages The WiTalk9 SE system comes with various configurations for you to choose from depending on your team size. This manual is for all WiTalk9 SE packages. The contents of each package are described below. WiTalk9 SE SMH Single-ear...
WiTalk9 SE-2S Product Structure WiTalk9 SE SMH Single-ear Master Headset (1) WiTalk9 SE SMH Single-ear Master Headset / WiTalk9 SE SRH Single-ear Remote Headset (1) SRH Single-ear Remote Headset Replaceable Battery (2) 6-Slot Charging Case (1) Charger for Charging Case (1) USB-C to USB-C Data Cable (1) On-Ear Foam Cushion (2) Over-Ear Protein-leather Cushion (2)
Page 5
(Audio transferring is not available) Note: If you connect the headset to Saramonic app on your phone or computer via the USB-C to USB-C data cable, the headset cannot be charged via this cable.
Page 6
Panel on Master / Remote Headset Charging Case for Battery When the charging case is connected to power, place batteries into it for charging. M / R Indicator: Operation Mode M / R Indicator ① Charging Indicator Charging Fully charged M indicator Master headset glows static blue...
Page 7
There is a default master headset (M indicator glows (1) The master headset will automatically exit pairing if it static blue) in the WiTalk9 SE system, but any remote is fully paired (with 4 remote headsets). headset ( R indicator glows static blue) can be set to a (2) If the master headset is not fully paired, press its master headset.
Page 14
WiTalk9 SE SMH 单 耳 主 机 /WiTalk9 SE SRH 单 电池充电座 电池充电座通电状态下,将耳机电池放入充电座内即可为 耳从机面板 电池充电。 ① 充电指示灯 M / R 指示灯: 充电中 充满电 ② 充电槽 状态 主从模式 M / R 指示灯 ③ 带锁直流电源插孔 主机 M 指示灯蓝灯常亮 长按静音键 5 秒 操作指南 从机...
Need help?
Do you have a question about the WiTalk9 SE System and is the answer not in the manual?
Questions and answers