Please save the manual for your up to 500 m. With Saramonic app connection, in-app future reference. If you need further assistance than the GPS tracking will automatically change the frequency to user manual, please consult your retailer for help or address the interference.
Available Packages The WiTalk9 system comes with various configurations for you to choose depending on your team size. This manual is for all WiTalk9 packages. The contents of each package are described below. WiTalk9 SMH Single-ear WiTalk9 SRH Single-ear 6-Slot / 10-Slot Charging Case...
Page 4
WiTalk9 WT2S WiTalk9 WT6S WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SMH Single-ear Master Headset (1) WiTalk9 SRH Single-ear Remote Headset (1) WiTalk9 SRH Single-ear Remote Headset (5) Replaceable Battery (4) Replaceable Battery (12) 6-Slot Charging Case (1) 10-Slot Charging Case (1) Charger for Charging Case (1) Charger for Charging Case (1) On-Ear Foam Cushion (2)
• Plug in the link cable kit to connect the master headset cover, then remove the battery for charging or insert the of the first WiTalk9 system to the remote headset of the battery for use. second WiTalk9 system, accommodating expanded communication needs.
Page 6
In view of the compatibility of different smart phones, Charging via USB-C Static red Saramonic suggests to use the USB-C adapter of the charging port link cable kit with your smart phone. Fully charged...
Page 7
Note: The link history will be cleared after the master ③ Battery Compartment Switch headset is restarted. Slide down the battery compartment switch to open its The wireless link and wired link features can not be used cover, then remove the battery for charging or insert the simultaneously.
② Slot for Battery ③ DC Jack with A Screw Nut How to Use The WiTalk9 system automatically pairs up right out of the box. Press and hold the power button for two seconds to turn on each headset to get used.
"Device Management" to enter power button once to exit the pairing status. the device management page. Note: You need to open the Saramonic app, then search How to forget paired headsets for and connect WiTalk9 in the Bluetooth list in the With the master headset off, simultaneously press and Saramonic app.
• Will the customized name of the remote headset that • Failed to power on is renamed by Saramonic app be retained the next time Make sure the battery level of the headset is not low. when it reconnects with the master headset? Yes.
Page 11
6-Slot Charging Case Port DC jack Dimensions 153×127×31 mm Weight 192.5 g Charging Power < 20 W Power Supply Range 12 V±10% Current < 1.6 A Charging Time ≤ 3.5 h Working Temperature 0℃ ~ 50℃ Storage Temperature -10℃ ~ 60℃ 10-Slot Charging Case Interface DC jack...
Need help?
Do you have a question about the WiTalk9 System and is the answer not in the manual?
Questions and answers