The Printout Position Is Not Correct; Graphics Do Not Print Correctly; The Surface Is Rough (Duplex Printing, Coated Paper) - Epson AcuLaser C1900 Reference Manual

The printout position is not correct

Cause
The page length and margins
are set incorrectly in your
application.

Graphics do not print correctly

Cause
The printer emulation setting
in your application may be
incorrect.
You may need more memory. Graphics require large amounts of
The surface is rough (duplex printing, coated
paper)
Cause
Duplex printing on damp
coated paper may produce a
rough printed surface.
286
Troubleshooting
What to do
Make sure that you are using the correct
page length and margin settings in your
application.
What to do
Make sure that your application is set
for the printer emulation you are using.
For example, if you are using the LJ4
emulation mode, make sure that your
application is set to use a LaserJet 4
printer.
memory. Install an appropriate
memory module. See "Memory
Module" on page 186.
What to do
Use coated paper that is newly
unwrapped. Always store coated paper
in a dry environment.