Photoconductor Unit - Epson AcuLaser C1900 Reference Manual

Replacing a developer cartridge before the end of its service
life
Use the following procedure to replace a developer cartridge
before the end of its service life.
1. Make sure that Ready or Sleep is displayed in the LCD panel.
2. Select Change Toner X (The letters C, M, Y, or K appear in
place of X, indicating the colors Cyan, Magenta, Yellow, and
Black.) in the Reset Menu on the control panel.
3. While the cartridge X you selected above moves to the
cartridge replacement position, Please Wait appears on the
LCD panel.
4. Replace Toner X appears in the LCD panel when the
cartridge to be replaced reaches the cartridge replacement
position.
5. See "Developer Cartridge" on page 242 for replacement
instructions.

Photoconductor Unit

Prepare a new photoconductor unit for replacement when you
see a message informing you to do so.
Handling precautions
Always observe the following handling precautions when
replacing the photoconductor unit.
When replacing the photoconductor unit, avoid exposing it
to room light any longer than necessary.
246
Replacing Consumable Products