Download
Share
Print this page
Walker Edison Chloe WECHL21604 Manual
  1. Manuals
  2. Brands
  3. Walker Edison Manuals
  4. Indoor Furnishing
  5. Chloe WECHL21604
  6. Manual
Walker Edison Chloe WECHL21604 Manual

Walker Edison Chloe WECHL21604 Manual

60” tv stand
Hide thumbs

Advertisement

Quick Links

Download this manual
TM
Chloe 60" TV Stand
SKU# WECHL21604
For Residential Use Only
Please visit our website for the most current instructions, assembly tips, report damage,or request parts. www.walkeredison.com
Revised 02/07/2024 (D)
©
1
1
Copyright
2024 by Walker Edison Furniture Co., LLC. All rights reserved.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Chloe WECHL21604 and is the answer not in the manual?

Questions and answers

Related Manuals for Walker Edison Chloe WECHL21604

Summary of Contents for Walker Edison Chloe WECHL21604

  • Page 1 Chloe 60” TV Stand SKU# WECHL21604 For Residential Use Only Please visit our website for the most current instructions, assembly tips, report damage,or request parts. www.walkeredison.com Revised 02/07/2024 (D) © Copyright 2024 by Walker Edison Furniture Co., LLC. All rights reserved.
  • Page 2 You can cause cracking or damage to the material and easily strip the hardware. If you choose to use a power tool, your product will no longer be covered under Walker Edison’ warranty. Glue is provided to secure wood dowels in place When inserting dowels, locate the appropriate hole, place a small amount of glue in the hole, and then insert the dowel.

  • Page 3: Table Of Contents

    Parts List Description Quantity Part Number Top Panel Bottom Panel Left Panel Right Panel Left Vertical Dividing Panel Right Vertical Dividing Panel Adjustable Side Shelf Adjustable Middle Shelf Sliding Door Left Door Right Door Back Panel Leg Frame...

  • Page 4: Hardware List

    Hardware List Part Size Name Quantity 8x30mm Wooden dowel 6x35mm Cam bolt 15x11mm Cam lock 30mm Sticker Handle 3x14mm Screw Door stopper European hinge 26mm Screw 3.5x14mm 6x50mm Bolt Hex key M4x57mm Shelf support pin 8x5x16mm...
  • Page 5 Hardware List Part Size Name Quantity Plastic wedge 3x17mm Screw 6x50mm Bolt Lock washer 11x1.5mm Flat washer 16x1mm Screw 8x3x15mm Glue tube The hardware quantities listed above are required for proper assembly. Extra hardware pieces may be included.

  • Page 6: Top Panel

    Step 1 Let’s get started! Using a screwdriver, begin by attaching both Door Stoppers (G) to the Top Panel (1) using the 14 mm Screws (F) . Then, screw the Cam Bolts (B) into the Top Panel (1).
  • Page 7 Step 2 Insert Dowels (A) into the Right Panel (4), Right Vertical Dividing Panel (6), Left Vertical Dividing Panel (5), and the Left Panel (3). The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hole for the dowel, place a small amount of glue in the hole and insert the dowel.
  • Page 8 Step 3 Insert Left Panel (3), Right Panel (4), Left Vertical Dividing Panel (5), and Right Vertical Dividing Panel (6) into the Top Panel (1). Secure with Cam Locks (C) and tighten with a screwdriver. Cam Locks Cam Locks help securely join two pieces together. Follow these easy steps.
  • Page 9 Step 4 Slide the Back Panel (12) into place using the grooves.

  • Page 10: Left Vertical Dividing Panel

    Step 5 Attach the Bottom Panel (2) to the Left Panel (3), Right Panel (4), Left Vertical Dividing Panel (5), and Right Vertical Dividing Panel (6) using the 50mm Bolts (K) and Hex Key (L).
  • Page 11 Step 6 Using a screwdriver, attach the Cam Bolts (B) into the Bottom Panel (2).
  • Page 12 Step 7 Insert Dowels (A) into the Leg Frame (13)
  • Page 13 Step 8 Attach the Leg Frame (13) to the Bottom Panel (2). Secure with Cam Locks (C).
  • Page 14 Step 9 Attach the four Legs (14) to the Leg Frame (13) using the Flat Washer (S), Lock Washer (R), and the 50mm Bolts (Q). Tighten the Bolts (Q) with the Hex Key (L). Q R S...
  • Page 15 Step 10 Place Stickers (D) over each Cam Lock (C) to ensure a clean finish.
  • Page 16 Step 11 Evenly space the Plastic Wedges (N) between the Back Panel (12) and the frame. Secure the wedges into place using the 17 mm Screws (P).
  • Page 17 Step 12 Using the pre-drilled holes, secure the Back Panel (12) to both the Right Vertical Dividing Panel (6) and the Left Vertical Dividing Panel (5) using the 15 mm Screws (T).

  • Page 18: Adjustable Side Shelf

    Step 13 Insert the Shelf Support Pins (M) into the Left Panel (3), Right Panel (4), and Left Vertical Dividing Panel (5), and Right Vertical Dividing Panel (6). Then, slide the Adjustable Side Shelf (7) & Adjustable Middle Shelf (8) into place. Make sure the notches on the shelves fit onto the Shelf Support Pins (M).
  • Page 19 Step 14 Attach the Handles (E) to the Left Door (10) & Right Door (11) using the 14 mm Screws (F). Then, attach the Hinges (H) to each door using the 14 mm Screws (J).
  • Page 20 Step 15 Using a screwdriver, attach the Left Door (10) to the Left Panel (3) using the 14 mm Screws (J). Adjusting The Cabinet Doors Adjust horizontal width Adjust depth position Adjust vertical height with this screw. by loosening the hinge arm via the screws in the mounting screw.
  • Page 21 Step 16 Now, let’s attach the Right Door (11) to the Right Panel (4) using the 14mm Screws (J).
  • Page 22 Step 17 To ensure the drawers slide smoothly, rub the Wax (U) into the glides surrounding the Top Panel (1) and Bottom Panel (2).
  • Page 23 Step 18 Insert one of the Sliding Doors (9) with the handle-side out into the left notch in the Top Panel (1) and Bottom Panel (2). Slide the door around until it meets the hinge-side of the Left Door (10). YES!

  • Page 24: Sliding Door

    Step 19 Now, repeat the process for the other side. Insert the other Sliding Door (9) handle-side out into the right notch in the Top Panel (1) and Bottom Panel (2). Slide the door around until it meets the hinge-side of the Right Door (11). YES!
  • Page 25 Step 20 Use the adjustable feet to ensure a level surface.

  • Page 26: Final Assembly

    Final Assembly Congratulations, you did it! Enjoy your new TV Stand! Congratulations on your new piece of furniture! We would love to hear about it and see it. Please leave us a review or post a picture with #mywalkeredisonhome...
  • Page 27 Assembling furniture can be tricky sometimes. Our customer service team, located in Utah, is here for product information, help assembling a product, or for any other customer support issue Call us at 801-433-3008 Email us at service@walkeredison.com Visit our Customer Service website at walkeredison.com/pages/customer-service We are available to help Monday -Thursday 8am-5pm, Friday 8am-3pm MST...