Renault SYMBIOZ 2024 User Manual page 136

WIPER
With the ignition on, pull the stalk 1
then release.
A longer pull will trigger, in addition to
2
the windscreen washer, two sweeps of
the wipers followed, a few seconds lat­
er, by a third.
On vehicles fitted with a multimedia
screen, you can choose to activate or
deactivate the third sweep of the
blades �� 112.
Note: in temperatures below zero, the
washer liquid may freeze on the wind­
screen, reducing visibility. Heat the
windscreen using the demister control
before cleaning.
When working in the en­
gine compartment, en­
sure that the windscreen
wiper stalk is in position
B (stop).
Risk of injury.
1 3 4 - G e t t i n g t o k n o w y o u r v e h i c l e
Efficiency of a wiper
blade
Check the condition of the
wiper blades. How long they last
depends on you:
– it must remain clean: clean the
blade and the screen regularly
with soapy water;
– do not use it when the screen is
dry;
– free it from the screen when it
has not been used for a long time.
In all cases, replace it as soon as
it begins to lose efficiency: ap­
proximately once a year �� 342.
Precaution for using the wipers
– In freezing or snowy conditions,
clear the screen before starting
the wipers (risk of motor over­
heating);
– ensure that no objects are ob­
structing the travel of the blade.
Rear windscreen wash, wiper
Rear windscreen wiper
With the ignition on, rotate the
ring 3 on the stalk 1 until the symbol is
aligned with the mark 2 :
–
off;
– intermittent wiping.
The wipers will pause for several
seconds between sweeps. The wip­
ing frequency varies according to
the vehicle speed;
– slow continuous wiping.
To stop the operation, rotate the ring 3
again.
Note: