Jorgenson Lockers Gladiator Assembly Instructions page 2

Assembly Instructions
Jorgenson Gladiator Lockers
Continued Assembly
• Slightly bolt the top/bottom panels, shelf, and coat rod inside the side and back panel.
• After the top and bottom panels have been attached, proceed to bolt the front frame* on the outside of
the left, right and bottom panels.
Assemble Optional Security Box and/or Foot Locker (if applicable)
2
Assembly of Optional Security Box:
• Slightly bolt security box side to top panel and shelf.
• Open door to door frame assembly and bolt the frame to locker top,
side, and shelves.
• Bolt door pull (or lock) to door
• Ensure allignment of all parts and tighten loose bolts
Note:
Top and bottom panels have two (2)
round, pre-drilled holes that can be found
on the back flange and are designed to
bolt to the back panel.
*Leave out bottom bolts of front frame if
installing foot locker.