Summary of Contents for Jorgenson Lockers Kids Sports Locker
Page 1
Assembly Instructions Jorgenson Kids Sports Locker TIP: Tip: Ensure that the bolts are installed Identify Parts on the outside of Remove unassembled locker parts from the locker and nuts are secured on the packaging. Next, locate and identify each part inside of the locker.
Page 2
Assembly Instructions Jorgenson Kids Sports Locker Continued Assembly • Slightly bolt the top panel, hat shelf, and bottom panel inside the side and back panel. Note: Top and bottom panels have two (2) round, pre-drilled holes that can be found on the back flange and are designed to bolt to the back panel.
Page 3
Assembly Instructions Jorgenson Kids Sports Locker Insert Front Door Frame • Place locker in the upright position and make sure locker is level. • When locker is level, test the door to determine it opens properly. Bolts can be adjusted if there are any problems with opening and closing.
Need help?
Do you have a question about the Kids Sports Locker and is the answer not in the manual?
Questions and answers