Regulatory Information - Blu B160V User Manual

Table of Contents

Advertisement

The caller ID does not display on incoming calls
• Contact your local network service provider and verify you have the
caller ID feature enabled on your account or verify if the caller may
have blocked his number from appearing.
The caller cannot leave a voicemail message
• Contact your local network service provider and verify if the voicemail
service is active on your account or check if the network is busy.
The phone does not connect to the internet
• Ensure with your service provider that your account has the
appropriate internet/data plan enabled.
• Ensure internet APN settings are configured (Carrier dependent).
Text Messages cannot be Sent / Received
• Ensure text messaging is enabled with your service provider.
• Ensure APN settings are configured (Carrier dependent).
41

Regulatory Information

FCC regulations
This mobile phone complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
42

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B160V and is the answer not in the manual?

Questions and answers

Linda
February 3, 2025

How do I shut down and restart my Blu-B160v??

1 comments:
Mr. Anderson
February 10, 2025

To shut down the Blu B160V:
1. Press and hold the Power and Volume Up buttons.
2. When the option to Power Off or Reboot appears, tap Power Off and wait for the device to shut down.

To restart the Blu B160V:
1. Press and hold the Power and Volume Up buttons.
2. When the menu appears, select Reboot to restart the device.

This answer is automatically generated

harryramharack
February 19, 2025

How to unlock the key board so that i can access both letters and numbers?I **** only accessing numbers ...no letters .

Julie Santrucek
March 2, 2025

How can I silence the ringer and notification sounds while in church

1 comments:
Mr. Anderson
March 2, 2025

To silence the ringer and notification sounds on a Blu B160V, go to Settings, then tap Sound & Vibration. You can either drag the Ring & Notification volume slider to zero or enable Do Not Disturb mode to manage sound settings.

This answer is automatically generated

Wilmer Lockett
March 23, 2025

why my B160V tracphone will not change from am to pm At noon

1 comments:
Mr. Anderson
March 23, 2025

The Blu B160V allows you to set the time manually. To ensure the correct AM/PM display, follow these steps:

1. From the Home screen, swipe up to access Apps and tap Clock.
2. Tap Menu > Settings > Change date & time.
3. Turn Set time automatically Off.
4. Manually set the correct time and verify if the AM/PM display changes properly.

If the issue persists, check your time format settings to ensure it is set to a 12-hour format.

This answer is automatically generated

wilmer l lockett
March 24, 2025

why don't my phone change from am to pm at noon

2 comments:
Mr. Anderson
March 24, 2025

The Blu B160V phone may not change from AM to PM at noon if the 24-hour format is enabled. To check and adjust this setting, go to Settings > Date & time and disable the 24-hour format option if necessary.

This answer is automatically generated

wilmer lockett
March 29, 2025

@Mr. Anderson the phone is set for 12hour format

wilmer lockett
March 29, 2025

why does my B160V phone not change from am to pm at noon

bladimir
April 16, 2025

por que mi telefono no tiene señal

1 comments:
Mr. Anderson
April 16, 2025

Your Blu B160V phone may have no signal for the following reasons:

1. You are outside the network coverage area.
2. Your phone is not connected to a network.
3. You do not have active service with your service provider.
4. If you are abroad, you may not be using the correct international access codes.

Check your network connection and contact your local network service provider to verify coverage and service status.

This answer is automatically generated

wilmer lockett
April 20, 2025

why does my phone not change from am to pm in wallflower mode

wilmer lockett
April 21, 2025

why won't my phone clock in wallpaper mode change from ac to dc at noon

Table of Contents

Save PDF