Blomberg DWT37200 Use And Care Manual page 10

Simply press the handgrips A and fold them
down. Pull tines up to fold them up again.
4.2.2 INSET SHELF WITH
VARIABLEHEIGHT SETTING TINES
(DEPENDING ON MODEL)
You can use this inset in the lower rack for
glasses and long-handled cutlery / utensils.
If you do not need the inset:
1. Fold the shelf upwards at the angle A.
2. Push the entire inset upwards B.
3. Place the inset in the upright position C.
4. Push the inset down and lock it with the
holder D.
If you would like to use the shelf again,
proceed in the opposite direction.
For the height setting:
1. Push the shelf upwards E.
2. Push the entire inset upwards F.
3. Fold it open in position G.
Notice :
When finished, test to ensure that the spray
arm can still move freely.
8
USA