Operating Range; Introduction Of Different Modes - AQUARK INVERPAD MR. PERFECT User Manual

Turbo pool heat pump
Table of Contents

Advertisement

4. Operating Range

To provide you comfort and pleasure, please set swimming pool water temperature efficiently and economically.
a. The heat pump can work between air -15°C~43°C,
b. Temperature of heating 18°C~40°C
c. Temperature of cooling 12°C~30°C
Ideal operation range is between air 15°C ~ 25°C.

5. Introduction of Different Modes

a.
The heat pump has three modes: Power, Perfect and Silence.
b.
They have different strengths under different conditions.
Mode
To obtain maximum heat output it is assumed the pool has the following conditions:
~ Private pool use.
~ Pool has been installed below ground.
~ Water table below pool construction depth.
~ Average water depth 1.30m.
~ Pool is covered for minimum 20 hours per day.
~ Filtration cycle 12-24 hours per day dependent on summer or extended season requirement – please refer to your dealer
for operating advice.
Modes
Heating capacity: 100% ~ 20% capacity
Power mode
Fast heating
Heating capacity: 80% ~ 20% capacity
Automatic adjustment according to ambient and
Perfect mode
water temperature, intelligent optimization.
High efficiency and energy saving
Heating capacity: 50% ~ 20% capacity
Silence mode
Operating at night.
5
Strength

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INVERPAD MR. PERFECT and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Mpc220Mpc270Mpc270sMpc320Mpc320sMpc410s

Table of Contents