Download Print this page
Jorgenson Lockers Kids Assembly Instructions

Jorgenson Lockers Kids Assembly Instructions

Stadium lockers

Advertisement

Quick Links

Assembly Instructions
Jorgenson Kids Stadium Lockers
Start Assembling
• Position the back panel on straight, even flooring or pair of saw horses.
• Gently bolt the left and right side panels to the inside of the back panel flange.
Left Side Panel
Top holes are
1/2" at the top
of each panel
shown.
1
Identify Parts
Remove unassembled locker parts from the packaging.
Next, locate and identify each part based on the
images show below:
(1) Front Frame
(1) Back Panel
Bolt the tamper-proof
screw on the inside
of the locker. Only the
screw heads should
be visible from the
outside of the locker.
Right Side Panel
(2) Side Panels
(1) Top Panel
(1) Bottom Shelf
View of locker with back panel flat
on floor or saw horses
The left and right side panels
must be placed inside the back
panel flanges.
Side Panels
TIP:
Tip: Ensure that the
bolts are installed
on the outside of
locker and nuts
are secured on the
inside of the locker.
(1) Coat Rod and
(2) Brackets
(1) Shelf
Back Panel

Advertisement

loading
Need help?

Need help?

Do you have a question about the Kids and is the answer not in the manual?

Questions and answers

Summary of Contents for Jorgenson Lockers Kids

  • Page 1 Assembly Instructions Jorgenson Kids Stadium Lockers TIP: Tip: Ensure that the bolts are installed Identify Parts on the outside of Remove unassembled locker parts from the packaging. locker and nuts are secured on the Next, locate and identify each part based on the inside of the locker.
  • Page 2 Assembly Instructions Jorgenson Kids Stadium Lockers Continued Assembly • Slightly bolt the top/bottom panels, shelf, and coat rod inside the side and back panel. • After the top and bottom panels have been attached, proceed to bolt the front frame* on the outside of the left, right and bottom panels.
  • Page 3 Assembly Instructions Jorgenson Kids Stadium Lockers Insert Front Door Frame • Place locker in the upright position and make sure locker is level. •Tighten all bolts. • To instill proper safety measures, we highly advise anchoring the locker to the floor or wall to avoid injury or theft.