Changing The Decor Panel; Fitting A Toekick Panel - Miele T 1570CI CONDENSER DRYER Operating Instructions Manual

Changing the decor panel

Note: The door should be closed
when installing the decor panel.
^ On the door lock side remove the
4 screws (3 on the side and 1
underneath) and the door strip.
^ Loosen the remaining 7 screws on
the lower and side decor strips until
the decor panel can be bowed
slightly and taken out.
^ Insert the new panel.
^ Reassemble in the reverse order and
tighten the screws.
Decor panel dimensions
11
Width: 23
1
Height: 23
1
Thickness: /
16
1
Panels between
require an adapter strip available from
the Technical Service Department.
/
16
/
8
1
/ and / thick
16 8

Fitting a toekick panel

The appliance toekick below the door
can be concealed using a toekick
panel.
The height and depth of the appliance
toekick cannot be altered.
A cut-out must be made in the toekick
panel around the ventilation slots. If the
ventilation slots are blocked the
machine will not dry efficiently.
Installation
25