Changing The Light Bulb; Power Failure - Emergency Door Release - Miele T 1570CI CONDENSER DRYER Operating Instructions Manual

Dryer care

Changing the light bulb

,
WARNING
To reduce the risk of electric shock,
disconnect this appliance from the
power supply by unplugging or
tripping the circuit breaker.
^ Unscrew the plastic bulb cover
located inside the drum and above
the door (see illustration.)
^ Replace the light bulb with a
temperature proof bulb (part # 02
150 900) available from Miele's
Technical Service Department.
The light bulb must not exceed the
maximum wattage quoted on the
data plate.
^ Refit the plastic bulb cover.
Take care that the bulb cover is
tightened into place. Otherwise
moisture may penetrate the socket
and cause a short circuit.
16
Power failure - Emergency
door release
^ Pull forward on the unhinged side of
the door.