Cue/Review Function; Automatic Updating Of The End Point; Use The [Sel] Key To Temporarily Cancel Fader Grouping - Yamaha AW4416 Supplement Manual

Additions and changes in version 1.2, 1.3

Cue/Review function

In version 1.2, the result of pressing the [FF]/[REW] key will change as follows
depending on the status of the transport.
If you press the [FF]/[REW] keys during playback
Cue/review will occur (in version 1.0, this occurred regardless of whether playing
or stopped).
If you press the [FF]/[REW] keys while stopped
Normal fast-forward or rewind will occur.
Refer to: [FF] key / [REW] key

Automatic updating of the end point

When the length of the song has changed as a result of an editing operation such
as deleting or moving a track, the end point is now set automatically to the last
location in the song.
Refer to: End point
Use the [SEL] key to temporarily cancel fader
grouping
When fader groups are enabled, you can now temporarily exclude a desired
channel from its fader group. This is convenient when you wish to adjust the bal-
ance of a specific channel within a fader group. The procedure is as follows.
1. Press the [SEL] key for the channel that you wish to temporarily exclude from
the fader group.
2. Continue holding the [SEL] key, and operate the
fader.
The corresponding channel will be excluded from
the fader group as long as you continue holding
the [SEL] key.
Refer to: Fader Groups
3. When you are finished operating the fader,
release the [SEL] key.
When you release the [SEL] key, the correspond-
ing channel will once again be part of the fader
group.
18
Operation Guide p.44
Reference Manual p.97
Reference Guide p.58
SEL SEL SEL SEL
ON ON ON ON
+6 +6 +6 +6
0 0 0 0
5 5 5 5
10 10 10 10
20 20 20 20
40 40 40 40
60 60 60 60